Knife sharpening angle chart

A sharpening angle is measured from the knife's flat face to the edge, on each side. The chart lists only what a maker says on its own page, and the diagram shows how those edges differ in section.

Kitchen gear on Amazon

Sponsored

As an Amazon Associate, KitchenProds earns from qualifying purchases. See our affiliate disclosure.

Prices and availability were accurate when retrieved from Amazon and may change. Retrieved Nov 15, 2026.

Quick answer

Wusthof states 14 degrees per side for standard blades and 10 for Asian-style blades; MAC and Global state 15 degrees per side. Victorinox's honing-steel angle is 20 degrees. Use the angle your maker prints, not a general rule.

Edge angle per side

10°Wusthof Asian-style14°Wusthof standard15°MAC, Global20°Victorinox steel

Cross-sections of an edge, drawn to scale from the angles in the table; the point is the cutting edge.

Angle by maker and knife style

Angles are per side unless the last column says otherwise. The quote column is the maker's own wording.

Maker and styleAngleMeasuredWhat the maker saysSource
WusthofStandard blades14°per side"Our sharpening angle for standard blades is 14˚ per side"Wusthof
WusthofAsian-style blades (Santoku, Nakiri)10°per side"... for Asian-style blades (Santokus, Nakiris) is 10˚ per side"Wusthof
MACMAC knives (hybrid Japanese/Western edge)15°per side"an angle around 30 degrees (15 degrees per side)"MAC Knife
GlobalGlobal knives15°per side"a 15-degree edge", ground to "a narrow 15-degree angle on both sides"Global Knives
VictorinoxKitchen knives, honing steel (honing, not sharpening)20°angle to the steel"Hold the knife at a 20° angle to the honing steel"Victorinox

Reading an angle

Per side means the angle between the blade face and the sharpening surface on one side. Double it for the included angle: MAC states 15 degrees per side, which is about 30 degrees in total. Victorinox's page gives its honing angle as the angle between knife and steel, so check which measure a page uses.

A narrower angle makes a thinner edge that cuts more easily; a wider one makes a sturdier edge. The makers here have picked different numbers for the steel and the design of each knife, which is why a table by maker is more useful than one rule for all knives.

Victorinox's kitchen-knife page asks you to hold the knife at 20 degrees to the honing steel and, for stability, to rest the steel on a towel or damp dish cloth.

Sources and what is missing

Wusthof: its FAQ, opened on the checked date. MAC: its About us page and the Togu sharpener page. Global: global-knives.com. Victorinox: its how-to-sharpen page, which gives the honing-steel angle.

Shun is not listed: its page could not be opened when this chart was built (the site returned a certificate error). We did not fill the gap from memory. No Western-versus-Japanese generalisation is published here, only maker statements.

Last checked November 15, 2026. Every value is logged with its URL in content/data/sources.json.

Frequently asked questions

What angle should I sharpen a Wusthof knife at?

Wusthof's FAQ says 14 degrees per side for standard blades and 10 degrees per side for Asian-style blades such as the Santoku and Nakiri.

Is 15 degrees per side the same as 30 degrees?

Yes in total: two sides of 15 degrees give an included angle of about 30 degrees, which is how MAC describes its edge.

Do I use the same angle for a honing steel?

Follow the maker. Victorinox's page says to hold the knife at 20 degrees to the honing steel; other makers state their own number.

This article reflects independent editorial research and disclosed buying criteria. KitchenProds does not sell, fulfil, warrant, or service any product. This is not a substitute for the manufacturer's manual or a qualified professional. Some links on this page are Amazon Services LLC Associates Program affiliate links; see our affiliate disclosure for details.